[ Curriculum Vitae | Projects | Publications | Home of Jeong ]

Theses

1. M. S. Thesis : "Finding the Edges of Mechanical Parts using Histogram"
1984, KAIST, Dept. of Mechanical Eng.
2. Ph.D. Thesis : "A Study on the Vibratory Assembly Method for Robotic Assembly"
1989, KAIST, Dept. of Production Eng.

Journal Paper

1. K.W.Jeong and H.S. Cho, "Development of an Image Processing Algorithm for Product Quality Inspection"
Tran. of KSME, Vol.8, No.6, pp.576-583, Dec. 1984.
2. C.T.Choi, B.R.Lee and K.W.Jeong, "A Design of Linearized and Simplified Arm Dynamics for the Manipulator with a Parallel Drive Mechanism"
Tran. of KSME, Vol.13, No.15, pp.855-861, 1989.
3. K. W. Jeong, and H.S. Cho, "Development of a Pneumatic Vibratory Wrist for Robotic Assembly"
Robotica, Vol.7, pp.9-16, 1989.
4. S.D.Park, K. W. Jeong, W. K. Chung and Y.Youm, "Development of a Control Method using both Electric and Pneumatic Actuators for a Heavy Load Handling Robot"
J. of KSPE, Vol.10, No.2, pp.14-21, Jun. 1993.
5. D.C.Park, W. Hwang, H.C.Park, K.S.Han and K. W. Jeong, "Tensile Strength of Pin-Loaded Carbon/Epoxy Laminates"
Advanced Composites Letters, Vol.4, No.1, pp.17-21, 1995, Woodhead Publishing Ltd.
6. H.S.Ahn, K. W. Jeong and J.H.Kim, "Surface Defect Inspection Method of Iron Samples using Image Processing"
J. of KSPE, Vol.12, No.10, pp.78-88, Oct. 1995.
7. Kyuwon Jeong and S. H. Lee, "Design of Robust Controller for Teleoperated Robot System with Time Delay"
Trans. of KSME, Vol.19, No.12, pp.3141~3150, 1995.
8. Kyuwon Jeong, "Robust Controller Design using SSV (μ) for Teleoperated Robot System with Time-Delay"
Journal of Control, System, Automation and Systems Engineering, Vol.2 No.1, pp.35~44, March, 1996.
9. D.C.Park, W. Hwang, H.C.Park, K.S.Han and K. W. Jeong, "Bearing Strength of Carbon/Epoxy Composite Laminates"
Advanced Composites Materials, Vol.6, No.1, pp.1-17, 1996, Japan Society for Composite materials.
10. K. W. Jeong, "Wide range sensing method using a wide angle lens camera"
J. of Ind. Sci. and Tech. Institute, Vol.12, No.1, pp.289-296, 1998.
11. E. S. Shin, K. W. Jeong, Y. H. Lee, J. S. Park, "Active control of micro-vibration using an electromagnetic actuator"
J. of Ind. Sci. and Tech. Institute, Vol.12, No.1, pp.297-304, 1998.
12. J. S. Park, K. W. Jeong, "Characteristics of the laser displacement sensor using optical triangulation method"
J.of KSPE, Vol.16, No.7, pp.40-50, 1999.
13. K. W. Jeong, "Signal processing Algorithm for High Precision Encoder"
J. of KSMTE, Vo.9, No.3, pp.103-110, 2000.6.
14. K. W. Jeong, B. S. Lee, " A Robot System for the Inspection of a Sewage Pipe"
J. of Ind. Sci. and Tech. Institute, Vol.14, No.1, pp.107-111, 2000.6.
15. J. Y. Kim, T. B. Eom, K. W. Jeong, T. Y. Choi, K. H. Lee, "Measurement and Compensation of Nonlinearity in Homodyne Interferometer"
J.of KSPE, Vol.18, No.9, pp.171-178, 2001.
16. Wi-Jin Oh, K. W. Jeong, "Precision Screw Driver utilizing a Bellows"
J.of KSMTE, Vo.10, No.5, pp.53-59, 2001, 10.
17. Taebong Eom, Jongyun Kim, Kyuwon Jeong, "The Dynamic compensation of nonlinearity in a homodyne laser interferometer"
Measurement Science and Technology, Vol.12, 2001, pp.1734~1738.
18. K. W. Jeong, "Posture estimation of a cylindrical object for a inspection robot"
J.of KSMTE, Vo.12, No.1, pp.8-15, 2003, 2.
19. K. W. Jeong, Yeon-Jung Kim, "An analysis on the actual states for performance evaluation at the unit school"
J. of Ind. Sci. and Tech. Institute, Vol.17, No.1, pp.39-45, 2003.6.
20. K. W. Jeong, J. S. Park, Changu Gang, "A study on the defect inspection of the LCD polarizer film using the vision system"
J. of Ind. Sci. and Tech. Institute, Vol.17, No.1, pp.47-53, 2003.6.
21. K. W. Jeong, Y. B. Jeong, “Development of ultra-precision micro positioning stage using a PZT actuator"
J. of Ind. Sci. and Tech. Institute, Vol.18, No.1, pp.27-33, 2004.7.
22. K. W. Jeong, "Pose Estimation of a Cylindrical Object Using Genetic Algorithm"
J. of KSMTE, Vol.14, No.3, pp.54-59, 2005, 6. 15
23. K. W. Jeong, J. S. Park, "A study of the control system for the ultra-precision stage"
J. of Ind. Sci. and Tech. Institute, Vol.19, No.1, pp.45-51, 2005. 6.
24. J. S. Park, K. W. Jeong, “A study on the design and control of a ultra-precision stage”,"
J. of KSMTE, Vol.15, No.3, pp.111-119 , 2006, 6.
25. J. S. Park, K. W. Jeong, “Robust control for a ultra-precision stage system”
Trans. of KSME A, Vol.30, No.9, pp.1094-1101 , 2006, 9.
26. K. W. Jeong, “Modelling of a PZT for robust position control of a nano stage"
J. of Ind. Sci. and Tech. Institute, Vol.20, No.2, pp.1-8, 2006. 12.
27. K. W. Jeong, “Development of multi channel gas leakage detector for large facility"
Journal of the Korean Society of Safety, Vol.23, No.3, pp.1~7, 2008
28. H. J. Ha, K. W. Jeong, “Fuzzy controller design for a nano precision stage driven by a PZT"
J. of KSMTE, Vol.18, No.2, pp.228-233, 2009.
29. K. U, Ahn, K. W. Jeong, “Inspection of the knuckle bracket holes of a shock-absorber using image processing method"
J. of KSMTE, Vol.19, No.6, pp.768-775, 2010
30. T, E. Lim, K. B. Lee, K. W. Jeong, “Numerical analysis of flow fields for the optimum design of cross flow turbine for micro hydraulic power"
J. of Ind. Sci. and Tech. Institute, Vol.24, No.2, pp.95-100, 2010
31. T. H. Lee, K. W. Jeong, J. W. Joo, “Strength Analysis for the Optimum Design of an Automatic Flood Gate”
J. of Ind. Sci. and Tech. Institute, Vol.25, No.1, pp.21-25, 2011
32. H. H. Cho, S. H. Park, K. W. Jeong, “Car Room Ventilation Controller Using Solar Energy”
J. of Ind. Sci. and Tech. Institute, Vol.25, No.2, pp.41-45, 2011
33. J. S. Park, K. W. Jeong, "Design of a controller for enhancing positioning performance of a PZT driven stage"
J. of KSMTE, Vol.21, No.3, pp.465-472. 2012.6
34. H. G. Kim, K. W. Jeong, "Development of an Automatic Face Velocity Controller for a Fume Hood System"
J. of KSMTE, Vol.22, No.2, pp.304-309. 2013.4
35. K. W. Jeong, "Strength analysis of a trough partition for rail road cable"
J. of Ind. Sci. and Tech. Institute, Vol.27, No.2, pp.59-63, 2013
36. S. Y. Jeong, K. B. Lee, K. W. Jeong, “Development of Pelton turbine for pico hydro power using surplus water”
J. of the institute of construction technology, Vol.33, No.2, pp.33-37, 2014.12.30
37. S. H. Park, K. W. Jeong, "Design of quadruped walking robot and obtaining the coordinates of a target object“"
J. of Ind. Sci. and Tech. Institute, Vol.28, No.2, pp.71-75, 2014
38. S. H. Park, K. W. Jeong, "Inspection of a rectangular pot hole of carrier tape using hough transform"
J. of Ind. Sci. and Tech. Institute, Vol.29, No.1, pp.49-53, 2015
39. S. H. Park, K. W. Jeong, "Vehicle Voltage Stabilizing Module Using Supercapacitors"
J. of KSMTE, Vol.24, No.1, pp.124-129. 2015.2
40. K. W. Jeong, J. Y. Shin, “Experimental characteristics study of a hybrid type supercapacitor”
J. of KSMTE, Vol.25, No.3, pp.307-311. 2016.8.
41. Y. E. Kim, Y. J. Lee, R. D. Won, K. W. Jeong, “Structural design of a tracking type solar energy generator”,
J. of Ind. Sci. and Tech. Institute, Vol.30, No.1, pp.47-50, 2016.
42. Taeheui Lee, Kyuwon Jeong, Duckho Kim, “Development of a lightweight BMC material using fly ash”
Advanced Composite Materials, Vol. 26, Issue 1, 2017, pp.55-64. DOI:10.1080/09243046.2016.1187821 ISSN: 0924-3046 (Print) 1568-5519 (Online) Published online: 13 Jun 2016.
43. Y. E. Kim, K. W. Jeong, J. J. Lee, “Wind pressure analysis for designing a tracking solar generator“
Journal of the Korea Academia-Industrial Cooperation Company (JKAIS), Vol.18, No.2, pp.672-680, 2017. 02.
44. J. S. Lee, K. W. Jeong, “Load Measurement Algorithm for a Vehicle Wheel Dynamometer”
J. of KSMTE, Vol.26, No.4, pp.418-424. 2017.8.
45. Y. E. Kim, K. W. Jeong, “Stiffness evaluation of the miniature solar tracker for wind load”
J. of Ind. Sci. and Tech. Institute, Vol.31, No.2, pp.21-26, 2017.
46. Y. E. Kim, K. W. Jeong, J. J. Lee, “Development of a Dual Worm Gear Solar Tracker Structure Considering wind load”
J. of KSMTE, Vol.27, No.2, pp.146-153. 2018.4.

Book

1. S. Rao, "Applied Numerical Methods for Engineers and Scientists”
Translation by S. S. Lee, N. Y. Kim, H. M. Kim, K. W. Jeong, C. Y. Choi, M. S. Hong"
SciTech, 2003.5.1

Domestic Conference

1. K. W. Jeong, H. S. Cho and C. W. Lee, "Development of a Computer Vision System for Manufacturing Automation"
KSME Conference, No.9-9, pp.468-478, 1984 Spring
2. S. R. Lee, K. W. Jeong, C. W. Lee and H. S. Cho, "Identification of Wrist servo System of PUMA-760"
KSME Conference, No.6-19, pp.633-636, 1986 Fall
3. Y. Youm, W. K. Chung and K. W. Jeong, "Development of a High Payload Robot and Direct Drive Robot"
KIEE, '90 Robotics and Automation Workshop, 90.3.9-3.10, KOEX
4. K. W. Jeong, W. K. Chung and Y. Youm, "Development of POSTECH DD Robot Controller"
Proce. of KSME Spring Conference (II), pp.198-201, 1990.6.29, ChunBuk Univ.
5. S. R. Yoo, K. W. Jeong, W. K. Chung and Y. Youm, "Teleoperation using 6 Axis Joystick"
KSME Fall Conference, 1990.11.3
6. B. K. Ahn, K. W. Jeong, K. S. Hong, W. K. Chung and Y. Youm, "Development of Automatic Sorting System using Character Identification"
KIEE, '91 Robotics and Automation Workshop, 1991.3.22~23, KOEX
7. S. D. Park, K. W. Jeong and Y. Youm, "Control Algorithm for Pneumatic Servo based on Fuzzy Rule"
Proc. of KACC, pp.1127-1132., 1991.10.22~24, KOEX
8. J. H. Kim, K. W. Jeong, Y. Youm, "Position Control for Multifingered Robot Hand"
Proce. of the 91 KACC, International Program, Vol.2, pp. 1779-1784, 1991.10.22~24, KOEX
9. K. S. Lee, K. W. Jeong, Y. Youm, K. S. Kim and Y. K. Kim, "Development of a Temperature and Oxygen Measuring System for Molten Metal of Tundish"
KIEE, '92 Robotics and Automation Workshop, pp.68-71, 1992.3.13, KOEX
10. C. T. Choi, K. W. Jeong, B. K. Ahn, K. S. Lee and Y. Youm, "The Design of a Robot Software Based on Real Time Operating System"
Proce. of KSME Spring Conference (I), pp.558-562, 1992.4.24-25, Ulsan Univ.
11. S. D. Park, K. W. Jeong and Y. Youm, "Development of Robot Actuated by Combination of a Pneumatic and a Electric Motor"
Proce. of KSME Spring Conference (I), pp.567-571, 1992.4.24-25, Ulsan Univ.
12. Y. M. Kim, K. W. Jeong, W. K. Chung and Y. Youm, "Impact Control of Direct Drive Manipulator using Passive Damper"
Proce. of KSME Spring Conference (I), pp.548-553, 1992.4.24-25, Ulsan Univ.
13. S. R. Yoo, K. W. Jeong, W. K. Chung and Y. Youm, "A Study on the Master Arm for Teleoperation"
Proce. of KSME Spring Conference (I), pp.638-643, 1992.4.24-25, Ulsan Univ.
14. J. H. Eun and K. W. Jeong, "Experimental Study on the Characteristics of Ultrasonic Motor"
Proce. of 9th KACC, pp.II-934-937, 1994.10.18, Daeduk Science and Culture Center
15. J. H. Kim, K. W. Jeong, J. K. Lee and Y. Youm, "A Study on the Robot for Brain Surgery"
KIEE, '95 Robotics and Automation Workshop, pp.44-48, 1995.4.1, KOEX
16. H. S. Choi, K. W. Jeong, W. K. Chung and Y. Youm, "Control of POSTECH Master Arm"
Proce. of KSME Spring Conference (I), 1995.4.22-23, POSTECH
17. J. H. Eun, C. W. Reeu and K. W. Jeong, "Development of a Robotic System for Mold Works"
Proce. of 10th KACC, pp.241-244, 1995.10.23-25, Swiss Grand Hotel
18. T. G. Lim and K. W. Jeong, "Evaluation of Operation Load in Automatic Material Moisture and Size Measuring System"
Proce. of 10th KACC, pp.232-235, 1995.10.23-25, Swiss Grand Hotel
19. J. B. Son, Y. Youm, W. K.Chung and K. W. Jeong, "An Easily Attainable and Effective Bilateral Control for Teleoperation"
Proce. of 10th KACC, International Program, pp.404-411, 1995.10.23-25, Swiss Grand Hotel
20. K. W. Jeong, "Neural Network Based Distortion Correction of Wide Angle Lens"
Proce. of 11th KACC, pp.299-301, 1996.10.24-26, POSTECH
21. K. W. Jeong, J. H. Kim, W. K. Chung and Y. I. Youm, "Study on the Control of XK 9 Automatic Bomb Transfer Machine"
Proce. of 1st Symposium on the Technology of Automatic Moving Gun, pp.153-158, 1996.11.28, ADD
22. K. W. Jeong, J. S. Park, "The Characteristics of a Laser Displacement Sensor with Various Object Conditions"
Proc. of '98 KSPE Spring Conf., pp.295-298, 1998,5,23, CBNU.
23. K. W. Jeong, H. S. Shin, " Surface Segmentation Method from a Range Image", Proc. of '98 KSPE Spring Conf., pp.486-489, 1998,5,23, CBNU
24. K. W. Jeong, "Measuremet of Circular Moire Fringe Position"
Proce. of 99 KACC, pp.C-387 ~ C-390, 1999,Oct. 14-16, IAE
25. K. W. Jeong, "Signal Processing Algorithm for High Precision Encoder"
Proc. of '99 KSMTE Fall Conf., pp.320-325, 1999,Oct.30, Hanyang Univ.
26. Wi-Jin Oh, K. W. Jeong, "Fastening Torque Control Mechanism for Automatic Screw Driver"
Proc. of 2000 KSMTE spring Conf., pp.561-566, 2000, ApriL 15, Changwon Nat'l Univ.
27. J. Y. Kim, T. B. Eom, K. W. Jeong, T. Y. Choi, and K. H. Lee, "Measurements of Nonlinearity in homodyne Interferometer"
Proc. of the KSPE Fall Conf. 2000, pp.55-59, 2000, Oct. 28, Ajoo Univ.
28. J. S. Yoo and K. W. Jeong, "Precision Enhancement for a CCD/LSB Type Shape Measuring System"
Proc. of the KSMTE Spring Conf.2001, pp.137-142, 2001, April 28, Chungbuk Nat'l Univ.
29. K. W. Jeong, "Guidance of the mobile robot for inspection of pipe"
Proc. of the KSMTE Spring Conf. 2002, pp.480-485, 2002, April 27, Kyungnam Univ.
30. J. S. Park, K. W. Jeong and C. G. Gang, "A study on the defect inspection on the LCD polarizer film using the vision system"
Proc. of KSTME Fall Conf. 2002, pp.164-169, 2002, Oct. 12, Incheon Univ.
31. Kyuwon Jeong , " Posture Estimation Method for a Cylindrical Object"
Proc. of KSMTE Spring Conf. 2003, pp.234-239, 2003, April, 18, Chungnam University
32. Y. D. Huh, Kyuwon Jeong, “Minimizing geometric error caused by varying velocity in CNC spring Forming Machine"
Proce. of 2003 KSME production and design division, 2003, 11 21, pp.208-213, Chungbuk University
33. J. S. Park, Kyuwon Jeong, “Robust control based on 2nd order model for a ultra precision stage”
Proce. of 2006 KSMTE Spring conference, 2006, May 12, pp.463-470, Changwon University
34. J. S. Park, Kyuwon Jeong, “Modeling of PZT for ultra-precision position control”
Proce. of 2006 KSMTE Fall conference, 2006, Oct 26-27, pp.344-349, Kangwon University
35. J. S. Park, Kyuwon Jeong, “Modeling and robust control of a nano-stage control using the frequency response analysis”
Proce. of 2007 KSMTE Spring conference, 2007, May 17-18, pp.414-419, SNUT
36. Kyuwon Jeong, B. H. Park, “Structure design for minimizing table deformation of a nano stage”
Proce. of 2007 KSDET Spring conference, 2007, June 8, pp., Seoul
37. J. S. Park, Kyuwon Jeong, “A study on the dynamic characteristics of a nano precision stage”
Proce. of 2007 KSMTE Fall conference, 2007, Oct. 25-26, pp.317-320, KAIST
38. Kyuwon Jeong, J. S. Park, “Tracking performance enhancement of a nano resolution stage”
Proce. of 2009 KSMTE Fall conference, 2009, Oct. 22-23, pp.374-379, Busan National University
39. K. U. Ahn, Kyuwon Jeong, “Inspection system for the outer tube ass'y of an automobile shock absorber”
Proce. of 2010 KSMTE Fall conference, 2010, Oct. 22-23, pp.354-355, Chosun University
40. Kyuwon Jeong, H. H. Cho, T. H. Lee, “Development of a finger module assembly system for an ACB”
Proce. of 2011 KSMTE Spring conference, 2011, April 13-15, pp.365-366, Jeju KAL Hotel
41. J. M. Yoon, Kyuwon Jeong, “Status of Telemanipulators for Hot Cell Operation in High Radiation Environment"
Proce. of 2011 KSMTE Fall conference, 2011, Oct. 14-15, pp.171, DCC
42 T. H. Lee, K. W. Kim, S. H. Park, Kyuwon Jeong, “The control of the LED headlight and heat transfer analysis"
Proce. of 2011 KSMTE Fall conference, 2011, Oct. 14-15, pp.173, DCC
43. H. H. Cho, Kyuwon Jeong, “Improvement of Piezoactuator Positioning Error with Hysteresis"
Proce. of 2012 KSMTE Spring conference, 2012, March. 26-27, p.131, Jeju KAL Hotel
44. H. H. Cho, Kyuwon Jeong, “Positioning Control of Ultra-Precision Stage"
2012 ICROS DaejeonChungcheong Division Conference, ICROS, Dec. 21, pp.161-162, Daejeon, Intercity Hotel
45. T. H. Lee, Kyuwon Jeong, “Development of Flyash Added Thermosetting Resin Material for a Trough"
Proce. of 2013 KSMTE Spring conference, 2013, April 24-26, p.196, Busan BEXCO
46.Kyuwon Jeong, S. H. Park, "Carrier tape inspection of using image processing"
Proce. of 2013 KSMTE Fall conference, 2013, Oct. 17-18, p.302, Jeju KAL Hotel
47. Kyuwon Jeong, “Fuzzy control method according to system damping factor"
Proce. of KSMTE Vibration and Control Division Conference, 2013, Aug.08.27 ~ 28, p.43, Kumoh National Institute of Technology
48. Kyuwon Jeong, S. H. Park “Development of the super capacitor module for the energy storage”
Proce. of 2014 KSMTE Spring conference, 2014,4.28-30, p.198, CECO
49. Kyuwon Jeong, K. B. Lee, J. S. Kim, S. Y. Jeong, “Micro hydraulic power generators design and structural analysis for surplus water”
Proce. of 2014 KSMTE Fall conference, 2014, 9.29-30, p.102, Jeju KAL Hotel
50. J. S. Kim, J. S. Lee, Kyuwon Jeong, “Accuracy improvement of flat type torque cell considering alignment error”
Proce. of 2015 KSMTE Fall conference, p.321, 2015.10.14.~2015.10.16
51. J. S. Lee, J. S. Kim, Kyuwon Jeong, “Development of a signal processor using DSP for a rotary type torque cell”
Proc. of KSME 2015 Fall Conference, pp.2863-2864, 2015.11.10.~2015.11.14., Jeju ICC.
52. Y. E. Kim, Kyuwon Jeong, “Solar tracker design considering wind pressure”
Proce. of 2016 KSMTE Fall conference, p.273, 2016.11.02.~2016.11.04. Jeju KAL Hotel
53. J. W. Song, Yong Jin Kwon, Kyuwon Jeong, “Voice command control for the watch dog robot”
2016 ICROS DaejeonChungcheong Division Conference, pp.78-79, 2016.1118, KAIST N7-3.
54. J. S. Lee, Kyuwon Jeong, “Signal processing system for plate type load sensor”
2016 ICROS DaejeonChungcheong Division Conference, pp.56-58, 2016.1118, KAIST N7-3.
55. J. S. Lee, Kyuwon Jeong, “Deformation analysis of the rotation type wheel with six-axis beam”
KSME 2016 Fall Conference, pp.2638-2640, 2016.12.14.~2016.12.16, Kangwon Land Convenction Center.
56. Y. E. Kim, Kyuwon Jeong, “Considering design load, worm gear set of traking type solar generator design”
KSME 2016 Fall Conference, pp.3263-3266, 2016.12.14.~2016.12.16., Kangwon Land Convenction Center.
57. S. J. Park, J. W. Joo, Kyuwon Jeong, J. S. Lee, C. H. Shin, “Development and Characteristics test of non-contact torque sensor”
KSME 2016 Fall Conference, pp.2043-2045, 2016.12.14.~2016.12.16., Kangwon Land Convenction Center. 58. Yong Jin Kwon, Kyuwon Jeong, “The frequency modulation type power supply system for the non-contact torque cell”
Proce. of 2017 KSMTE Spring conference, p.235 2017.04.26.~2017.04.28., Hotel Inter-Burgo Excco.
59. Y. E. Kim, Kyuwon Jeong, “Structure evaluation of tracking solar power generator due to wind pressure“
Proce. of 2017 KSMTE Fall conference, p.153, 2017.12.06.~2017.12.08., Jeju KAL Hotel
60. Yong Jin Kwon, Kyuwon Jeong, “Designing DSP circuit for the Wheel force sensor”
Proce. of 2017 KSMTE Fall conference, p.204, 2017.12.06.~2017.12.08. Jeju KAL Hotel
61. Kyuwon Jeong, T. G. Lee, “Bio-signal measurement for detecting stress”
Proce. of 2018 KSMTE Spring conference, p.180, 2018.05.02.~2018.05.04. Daejeon DCC.
62. Yong Jin Kwon, Kyuwon Jeong, “High speed data processing for the wireless type wheel force sensor”
KSME 2018 Dynamics and Control Division Spring Conference, pp.78~79, 2018.05.23.~25, Kolon Hotel
63. Yong Jin Kwon, Kyuwon Jeong, “Development of the signal processing system of the wireless type wheel dynamometer“
KSME 2018 Conference, pp.2148~2151, 2018.12.12~2018.12.15, Kangwon Land Convenction Center.
64. Kang Hyojin, Kyuwon Jeong, “Structure Design of a Single Axis Solar Tracker”
KSME 2018 Conference, pp.3130~3132, 2018.12.12~2018.12.15, Kangwon Land Convenction Center

International Conference

1. K. W. Jeong and H. S. Cho, "Assembly Performance of A Robotic Vibratory Wrist"
InCoM89, IFAC, Sept.26-29, 1989, Spain, Madrid, pp.759-762
2. K. W. Jeong and H. S. Cho, "On a Vibratory Assembly Method Using a PWM Control Based Pneumatic Assembly Wrist"
10th Int. Conf. on Assembly Automation, Oct.23-25, 1989, Japan, Kanazawa, pp. 87-94
3. K. W. Jeong, W. K. Chung and Y. I. Youm, "Development of 7-D.O.F. Direct Drive Robot"
3rd ISRAM(international Symposium on Robotics and Manufacturing 1990.7.18-20, Bancouver, Canada, pp.577~582.
4. S. R. Yoo, K. W. Jeong, W. K. Chung and Y. Youm, "Development of Anthropomorphic Master Robot for Teleopertation"
Int. Conf. on Manufacturing Automation, Aug. 10-12, 1992, HongKong, pp.322~327.
5. J. H. Kim, K. W. Jeong and Y. Youm, "Fine Manipulation for Multifingered Robot Hand"
IFToMM-jc, Int. Sym. on Theory of Machines and Mechanisms, Sept. 24-26, 1992, Nagoya, Japan, pp.324~329.
6. K. S. Lee, J. H. Kim, K. W. Jeong and Y. Youm, "A New Technique of Elliminating Void in Workspace of a Manipulator with an Offset Wrist"
4th ISRAM, 1992.11-11-13, Sante Fe, New Mexico, U.S.A., pp.63~68.
7. Y. H. Oh., W. K. Chung, K. W. Jeong and Y. Youm, "Implementation of Passive Hardware Damper for Force and Impact"
Proce. of IEEE Conf. on Robotics and Automation, San Diego, May 8-13, 1994, pp.937~943.
8. Suckhan Lee and Kyuwon Jeong, "Design of Robust Time Delayed Teleoperator Control System"
Proc. of IROS94, pp.1413-1420, Munchen, Sept. 12-16, 1994, pp.1413~1420.
9. C. W. Reeu and K. W. Jeong, "Distortion Correction of Fish-Eye Lens for Wide Angle Range Finder"
Proce. of 2nd ACCV, Dec.5-8, 1995, Concorde Hotel, Singapore, II-200 ~ II-204.
10. Jaebum Son, Y. Youm, W. K. Chung and Kyuwon Jeong, "An Easily Attainable and Effective Bilateral Control for Teleoperation"
Proce. of IEEE Conf. on Robotics and Automation, Minneapolis, Minnesota, U.S.A., April 22-28, 1996, pp.1357~1362.
11. Kyuwon Jeong, Jong-yul Lee, "High Precision Encoder based on Circular Moire Fringe"
Proce. of ICoPE 2000, (Int. Conf. on Precision Eng.), Singapore Expo, Singapore, March 21-23, 2000, pp.148~153.
12. Kyuwon Jeong, J. S. Park and J. S. Yoon, "High precision encoder using moire fringe and neural networks"
SPIE International symposium on Intelligent Systems and Advanced Manufacturing, (Opto-Mechatronics System), USA, Boston, Nov. 5-6, 2000.
13. Ji Sup Yoon, Kyuwon Jeong and B. S. Lee, "An Inspection Robot of Sewerage Pipes"
IFAC Workshop on Mobile Robot Technology, Korea, Jejudo, May 20-23, 2001.
14. J. S. Park and Kyuwon Jeong, "Robust control of a ultra precision stage"
ASCC2006, Indonesia, Bali, July 18-21, 2006.
15. J. S. Park and Kyuwon Jeong, “Modeling of a PZT actuator for a Robust Position Control"
Proce. of The 2nd Int. Conf. on Positioning Technology, 2006, Oct 12-13, pp.254-259, Jeju KAL Hotel, Jejudo
16. Kyuwon Jeong and Jongsung Park, "Ultra-precision positioning control based on the frequency response analysis"
Proce. of the International Conference on Smart Manufacturing System, pp.219-224, April, 9-11, 2008, Kintex, Gyeonggi-do, Korea.
17. Kyuwon Jeong, “On the dynamic characteristics of a PZT driven ultra precision positioning stage”
Proce. of The 3rd Int. Conf. on Positioning Technology, pp. 257 ~ 258, 2008, Nov. 26-28, Actacity Congress Center, Hamamatsu, Japan
18. Kyuwon Jeong, “On the affection of the fuzzy control input to positioning fluctuation of a nano-precision stage”
Proce. of The 5th Int. Conf. on Positioning Technology, pp. 124 ~ 125, 2012, Nov. 14-16, Garden Villa, Kaohsiung City, Taiwan
19. H. h. Cho and Kyuwon Jeong, "Positioning Control of Ultra-precision Stage"
Proce. of the ICMTE (International Conference of Manufacturing Technology Engineers) 2012, p.216, Oct.18-19, Millennium Seoul Hilton Hotel, Seoul, Korea
20. T. H. Lee and Kyuwon Jeong, "Nonlinear Finite Element Analysis of a Trough Made from GFRP with Flyash"
Proce. of the ICMTE 2012, p.152, Oct.18-19, Millennium Seoul Hilton Hotel, Seoul, Korea
21. T. H. Lee, Kyuwon Jeong, and Duckho Kim, "Development of flyash added GFRP material"
Proce. of the ICMTE 2013, p.67, Oct.10-11, Shanghai Jiatong University, Shanghai, China
22. S. G. Park, S. J. Yun, H. J. Kim, Y. J. Yuk and Kyuwon Jeong, "Synthesis and Electrochemical Characterization of Porous Li4Ti5O12 particles"
The 7th Asian Conference on Electrochemical Power Sources (ACEPS-7), p.98, Nov.24-27, 2013, Senri Life Science CEnter, Osaka, Japan
23. S. G. Park, S. K. Ahn, Kyuwon Jeong, H. J. Kim and H. I. Kim, "Evaluation of Linear Carbon and Hybrid Metallic Materials for Lithium Ion Capacitor"
The 7th Asian Conference on Electrochemical Power Sources (ACEPS-7), p.14, Nov.24-27, 2013, Senri Life Science CEnter, Osaka, Japan , ACEPS-7
24. S. J. Yun, H. J. Kim, H. I. Kim, S. G. Park, Kyuwon Jeong, "Electrochemical Characteristics of Carbon Coated Li4Ti5O12 by Carbon Source and Structure for Hybrid Capacitor particles"
224th ECS Meeting, p.671, San Francisco, CA, Oct.27 ~ Nov.1, 2013, Hilton San Francisco
25. Suk-Hee Park, Kyuwon Jeong, Seok-Ho Rhi and June-Seob Kim, “Measuring thermal conductivity and analyzing temperature distribution of a diamond tool”
Proce. of the ICMTE 2014, p.49, Sept.30-Oct.2, Jeju KAL Hotel, Jeju, Korea
26. Sukhee Park, Kyuwon Jeong, “Visual inspection of Paper Carrier Tape Pothole”
ISOT2014, University of Washington, Seattle, Washington, 2014.11.05-2014.11.07, pp.277-279
27. Suk-Hee Park, Kyuwon Jeong, “Design of a vision guided quad-legged robot”
ISOT2015 (International Symposium of Optomechatronics Technology), EPFL (Ecole Polytechnique F?d?rale de Lausanne), Neuch?tel, Switzerland, 2015.10.14.-2015.10.16
28. Jinsung Lee, Kyuwon Jeong, “Signal processing method for vehicle wheel force sensor using DSP”
5th International conference on Mechanical and Industrial engineering (ICMIE’16) part of Proce. of 2nd World congress on Mechanical, Chemical and Material engineering (MCM2016), Budapest, Hungary, 2016.08.22-2016.08.23, ICMIE 110-1.
29. Suk-hwan Oh, Kyuwon Jeong, June-seob Kim, “Machining performance test of a diamond wheel”
Proce. of the ICMTE 2016, p.73, Oct. 05-07, Ritz-Carlton Hotel, Seoul, Korea.
30. Kihyun Park, Kyuwon Jeong, “Composition selection using Taguchi method for a diamond tool”
Proce. of the ICMTE 2016, p.127, Oct. 05-07, Ritz-Carlton Hotel, Seoul, Korea.
31. Youngeun Kim, Kyuwon Jeong, “The Stiffness Evaluation of Tracking Solar Power Generator for Wind Load”
6th International conference on Mechanical and Industrial engineering (ICMIE’17) part of Proce. of 3rd World congress on Mechanical, Chemical and Material engineering (MCM2017), Rome, Italy, 2017.06.08-2017.06.10, ICMIE 122-1
32. Yongjin Kwon, Kyuwon Jeong, “Design of the Wireless Power Supply System for the Wheel Force Sensor”
6th International conference on Mechanical and Industrial engineering (ICMIE’17) part of Proce. of 3rd World congress on Mechanical, Chemical and Material engineering (MCM2017), Rome, Italy, 2017.06.08-2017.06.10, ICMIE 114-1
33. Yong-jin Kwon, Kyuwon Jeong, "Data processing and transmission of Wheel Force Sensor"
KSME-ETME2018, Aug. 19-22, 2018, Ramada Plaza Jeju Hotel, Jeju, Korea
Please feel free to contact me !
Email : jeong@chungbuk.ac.kr
Voice : +82-43-261-3222
Fax : +82-43-263-2448